Products & Solutions



Following drilling, completion and stimulation operations prepare the reservoir and well for production. Evonik’s chemistries are used for biocides, cleaning, flow improve-ment, friction reduction and downhole surface modification.



What Evonik brings to the Application



Acid Gas Thickener

Additives to be used in hydraulic fracturing, with HCl and gellants.

PEG 2 Tallow Amine

Biocides/ Oxidizers

Finished products for use as an oilfield biocide and oxidizing agent for produced water clean up, frac water pre-treatment and oxidizing organics, bacteria and iron sulfide. Evonik’s biocide has federal EPA approval.

Peracetic acid

Corrosion Inhibitors

Additives to be used in formulations of corrosion inhibitor chemistries.

Amine Alkoxylate



Performance additives

Quaternary amines

Defoamer and Defoamer Agents

Additives for water treatment, drilling and fracturing fluids.

Precipitated silica
Fumed silica

Polyether siloxanes

Dispersible defoamer based on organo-modified siloxanes

Anionic surfactant

Rapid wetting anionic surfactant for use in production wells.

Fluid Loss Agents

Building blocks to make polymers that prevent the loss of fluid to the

Alkyl methacrylates,
aminofunctional methacrylates

and methacrylamides

Foamers & Foaming Agents

Chemistries (additives and finished products) to be used downhole as a foam stabilizer/ wetting agent in hard water, for drilling muds, foam enhancement in foam fracturing and oil displacement.

Amphoteric surfactants
including capramidopropyl betaines and amine oxides

Fracturing Fluid Additives

Additives to modify rheological properties of supercritical gases (CO2) to improve sweep efficiency.

Free Flow / Anti- Caking Agents

Additives to help prevent formation of lumps and improve flow of powders.

Fumed silica

Precipitated silica

Gelling Agents

Agents to assist with gel texture, including in hydrochloric acids.

Tallow betaine

Aminofunctional methacrylates,

hydroxy methacrylates and methacrylamides

Liquid to Powder Conversion

To convert difficult-to-handle liquids (freezable, very viscous, hygroscopic) into powders.

Fumed silica

Precipitated silica

Loss Control

Superabsorbents for loss control applications.

Superabsorbent polymer

Proppant Coatings and Proppant Agents

Additives to improve adhesion of the resin coating to proppants.
Resin reinforcement.

Amino/multifunctional silanes

Fumed silica

Rheology Modifiers and Viscosifiers

Additives to support the development of polymers and alter rheological properties including control of sagging, settling, stability and processability of liquids and powders.

Fumed silica

Precipitated silica

Superabsorbent polymer

Aminofunctional methacrylates,

ether methacrylates and methacrylamides

Scale Inhibition

Prevent scale deposition on pipelines & flowlines.

Low molecular weight
nitrogen- and phosphorous-free


Ether methacrylates and methacrylic acid

Scale Removers

Finished products which can be used in oilfield service operations to remove scale in wellbore or near wellbore radius.

Peracetic acid

Shale Control

Building blocks for the production of shale control polymers.

Aminofunctional (cationic)
methacrylates and


Stimulation Additive

Slurry additives to render particulate surfaces extremely hydrophobic.

Silicone quat

Swelling Agent

Superabsorbents for general solidification and absorbing applications.

Swelling agent for swellable Packers.

Superabsorbent polymer

Superabsorbent polymer

Water Treatment

Building block to make cationic water soluble polymer to treat production waste water.

Cationic methacrylamide

Cationic methacrylate

Wetting Agents

Additives to help reduce the surface tension of a liquid, causing the liquid to spread across or penetrate more easily the surface of a solid.

Ammonium chloride products

Organo-modified siloxanes